Home

News

Forums

Hardware

CPUs

Mainboards

Video

Guides

CPU Prices

Memory Prices

Shop



Sharky Extreme :


Latest News


- Kingston Unleashes HyperX T1 Series Memory
- Hitachi Goes Green with the Travelstar 5K500.B Mobile HD
- Palit Hits a Performance High with the Revolution 700 Deluxe
- SanDisk Unveils ExtremeFFS for Improved SSD Performance
- Alienware Unleashes the ATI CrossFireX-powered M17 Notebook
News Archives

Features

- SharkyExtreme.com: Interview with Microsoft's Dan Odell
- SharkyExtreme.com: Interview with ATI's Terry Makedon
- SharkyExtreme.com: Interview with Seagate's Joni Clark
- Half-Life 2 Review
- DOOM 3 Review

Buyer's Guides

- November Value Gaming PC Buyer's Guide
- September Extreme Gaming PC Buyer's Guide
- July High-end Gaming PC Buyer's Guide

HARDWARE

  • CPUs

    - Intel Core i7-965 XE & Core i7-920 Review

  • Motherboards

    - Intel DX48BT2 (X48) Motherboard Review
    - AMD 790GX Chipset Review
    - Gigabyte GA-MA790FX-DS5 Motherboard Review
    - AMD 780G Chipset Review

  • Video Cards






  • The WinFast GeForce 3 TD follows the NVIDIA reference design exactly, but there are subtle differences that do set the WinFast apart. Leadtek was fortunate enough to have timed their release with NVIDIA's release of the A05 stepping of the GeForce 3 core. The 1st GeForce 3 boards released used an older A03 stepping of the core, which NVIDIA deemed as unstable.

    As with all other GeForce 3 based products, the WinFast utilizes the AGP interface (2x/4x) and offers 64MB of DDR-SDRAM standard. All shipping GeForce 3 boards use 3.8ns RAM which is capable of running at up to 260 MHz (520MHz DDR), however like most boards, the WinFast is shipping with the RAM underclocked to 230MHz (460MHz DDR). These are the same timings that we originally saw with the release of the GeForce 2 Ultra, and we suspect that NVIDIA specified that the RAM run at these reduced speeds to play it safe.

    Unlike most of the GeForce 3 boards that we have seen, Leadtek's board uses custom Heatsinks for both the GPU and the RAM. The WinFast TD has thick, flat RAM-sinks emblazoned with the Leadtek logo and uses an oversized CPU cooler to help improve heat dispersion. Upon 1st glance one might assume that Leadtek's RAM-sinks were less efficient than those found on boards from Visiontek and Asus and testing reveals that they do not cool quite as well. The GPU cooler has a larger surface area than the NVIDIA reference fan, but uses a smaller fan somewhat negating the effects of the larger heat-sink.

    Leadtek has also done a "one up" on other GeForce 3 manufacturers by including a Conexant TV-Out component with the WinFast GeForce 3 TD. Standard TV-Out components made by Brooktree that appear on the Visiontek GeForce 3 are capable of delivering a signal as large as 800x600 to a standard TV. In comparison, the newer Conexant TV-Out module allows the WinFast to render up to 1024x768 on a TV. At lower resolutions like 800x600, the GeForce 3 has little to offer over GeForce 2 based products, but the differences become clearer as the resolution is increased. When paired with fully hardware Anti-Aliasing, 1024x768 on a 32" TV is a site to behold. The Conexant chip on the WinFast GeForce 3 TD is a definite plus.





    Copyright © 2002 INT Media Group, Incorporated. All Rights Reserved. About INT Media Group | Press Releases | Privacy Policy | Career Opportunities